Coast Guard Cutters Rusting Away

Moisture leads to rust formation. That’s a fact. And based on that, it’s pretty easy to conclude that rust is one of those that give the coast guard a lot of troubles that require them to have an effective rust remover. One, in particular, that is suffering from corrosion’s destructive effects is the US Coast Guard Cutter Bear. If only they know what’s the best rust remover to use.

Launched in 1980, the said ship was built to last for three decades. However, after just 21 years, it is already undergoing a $10 million worth of repair. And just to give it another 10 to 15 years, officials are counting on upgrades and repairs.

With all the damages that rust brings to the cutter, Cmdr. William Lane, commanding officer of the ship said that it was always a struggle for them to keep the boat fit for patrolling. The worse part is that Cutter Bear is not the only coast guard ship that needs rust treatment. With funds not yet available though, most of the cutters will have to wait longer to get fixed.

Read more about Rust Eating Away Coast Guard Cutters

=======================

Cmdr. William Lane climbs down a steep ladder deep within the U.S. Coast Guard Cutter Bear.

Stepping over a pipe with paint blistered and bubbled by rust, the commanding officer ducks into a narrow storage area beside the hull and shines a flashlight into a dark corner mottled with rust, the smell of corroded iron mingling with diesel fuel and saltwater.

“I’m not sure how far into the hull plating it goes,” Lane says as he peers into the void two feet below the cutter’s waterline.

No water can seep in now. The 270-foot Bear has been in dry-dock at the Coast Guard Yard here since October, where it is undergoing a $10 million overhaul scheduled to last until May. When it was launched in 1980, the first of a class of medium-endurance cutters (WMEC) designed for search-and-rescue and law enforcement, the Bear was built to last 30 years. Now officials are counting on repairs and upgrades to give it another 10, maybe 15, years on patrol from its base in Portsmouth, Va.

========================

Read more about Coast Guard Cutters Break Away Due to Rust at: HuffingtonPost.com

========================

Rust spurs problems. It weakens metal items and structures thus making them prone to cause accidents. And same with US Coast Guard cutters, the damages corrosion brings cost a lot of money.

But since it is quite difficult to prevent rust formation, the next best that you and other property owners can do is to avoid the corrosion from getting worse. And to do that, you will need Rusterizer. But why Rusterizer out of all the rust removal sprays?

Simply, it’s because Rusterizer promises a safe rust removal process. Because of its all organic ingredients, it can deliver a corrosion clean-up that’s effective as well as safe.

Have a rust-free home. Implement rust treatment with the effective and safe Rusterizer.

National Corrosion Control for Helicopters Now Open in Missouri

Rust is one of National Defense’s long-time enemy. It’s been costing the government a huge sum of money for repairs annually. And so to counter its destructive effects on Army’s Black Hawks, a corrosion center was opened last December 19 in Missouri.

The National Guard facility is officially called as Corrosion Control Center. It is a part of the National Guard’s Theatre Aviation Sustainment Maintenance Group in Springfield-Branson National Airport.

The center is basically a helicopter repair facility providing corrosion control services to Black Hawks. As one of four helicopter maintenance supports in the country, it will be supporting 14 states or regions. Its crews’ basic function is to strip the aircraft of paint, inspect for rust, treat and to re-paint it.

Read more about Helicopter Corrosion Control Facility Opened in Missouri

=======================

A ribbon-cutting Monday marked the opening of a National Guard facility supporting the U.S. Army’s Black Hawk helicopters.

It’s called a Corrosion Control Center, part of the National Guard’s Theatre Aviation Sustainment Maintenance Group out of Springfield-Branson National Airport.

The Springfield facility provides maintenance support for a 14-state region. It’s one of only four like it in the country.

“”The reality is, we’ve never painted aircraft at this facility, of this magnitude,” says Richard Lawrence, allied trades foreman. “We used to paint air frames at the AVCRAD shop, however, not on this magnitude. It is a big deal. It’s awesome to be a part of it and support the 14 state region.”

=========================

Read more about Black Hawk Corrosion Protection Facility Now Open in Missouri at: OzarksFirst.com

=========================

Like the helicopters, any metal item or surface is prone to corrosion. Thus, all metal pieces need regular inspection. However, if rust had already formed, an immediate rust removal treatment is a requirement.

Rust removal though will not be effective without the help of a rust removal solution. Nonetheless, not all available rust removers can provide positive results. And so, your rust removal product must be well-picked.

For a rust treatment that’s both effective and safe, opt for a non-toxic rust remover. And one that can be sure save your metal items all while protecting your health is Rusterizer.

Protect metal items and your health. Implement rust treatment with non-toxic Rusterizer.

Corrosion in Pipe Led to Falling and Suing

Antonio Marco Torres is an industrial worker. However, on May 24, 2011, he met an accident that he related to a corroded underground piping. For that, he filed a lawsuit on December 7 against the Eastman Chemical to which he worked for when the incident occurred.

In the suit, it was stated that Torres was about to retrieve his working tools when the ground underneath him collapsed. It is said that the corroded underground piping that remained unrepaired caused the ground to give in.

For that, Torres accused Eastman Co for negligence. Particularly, he accused the company for failing to provide him proper assistance and equipment for the job, failing to provide a safe working place, failing to implement procedures that would protect him and other workers and failing to monitor the condition of the place he was assigned to work.

Read more about Texas Lawsuit Due to Corroded Underground Piping

========================

An industrial worker has filed a personal injury lawsuit against Eastman Chemical that claims an underground pipe caused the ground to give away and resulted in his falling into a hole.

Antonio Marco Torres filed suit against Eastman Chemical Co. on Dec. 7 in the Eastern District of Texas, Marshall Division. His wife, Estella, is also a plaintiff.

The incident occurred on May 24 while Torres was working for Gregg Industries Insulators. He and his co-workers were instructed to repair a steam leak near a room on the grounds of the Eastman Chemical Co. plant in Longview. The suit states Torres was walking back to his work truck to retrieve tools, the ground underneath him collapsed, which caused him fall into a hole.

=========================

Read more about Corroded Pipe Caused Brought Company to Federal Court at: SETexasRecord.com

=========================

With rust comes the weakening of a metal structure or item. And just like what happened in Texas, it can cause accidents that could put someone’s life at risk more than just causing minor injuries.

Hence, an inspection for corrosion must always be implemented on metal pieces and surfaces. At the first sight of rust build-up, a swift action to treat it must then be observed. But what good is a plan to implement an immediate treatment if you don’t have a rust remover that is surely effective?

And so before you implement your rust removal process, see to it that you have a rust removal product first. But apart from just being effective, your rust remover must also be non-toxic for a risk-free bed bug treatment.

Rusterizer is the best non-toxic rust remover you can purchase. Get it today and save your metal pieces the safe way.

Tips to Make Metal Items Survive the Winter

Winter is soon coming. And during that time, there will be many metal items that won’t be used for weeks or even months. If you allow those items to just stay idle for too long, corrosion could get the best of them.

Your bike and garden tools are examples of the things that often turn rusty over the winter. Given that moisture is almost everywhere especially with the presence of snow, rust formation is very hard to avoid. That doesn’t mean though that it is impossible.

With some steps, your metal items can survive the cold and moist winter. That also means that you prevent any unnecessary spending at the end of the season. But what are those steps that you must take?

Well, first off, make sure to hide your metal pieces in a cool dry place. Also, you need to check and clean them regularly to avoid even the smallest rust build-up to turn into a major corrosion.

Read more about How to Make Your Metal Pieces Rust-Free Throughout Winter

==========================

Winter is just around the corner, and many of your favorite toys will be sitting idle for months. You want to protect and repair your gear so it will be ready to go next spring.

Things with wheels and engines typically require the most attention because they can sustain serious and expensive damage during winter.

We talked to experts and got some good advice on how to winterize your gear.

==========================

Read more about Winter Tips: How to Keep Metal Items Away From Rust at: IdahoStatesMan.com

==========================

With winter comes a bigger possibility for many metal items to get rusty. With care and a trusted rust removal product though, rust formation can be prevented. But which rust remover should you get.

Among the many rust removal products in the market today, the one made of organic ingredients is the best that you can use. Apart from effectively treating rust, it can also keep you from chemical-related illnesses that you might get from conventional rust removal products.

Protect your metal items from rust during winter. Get Rusterizer today for an effective and safe rust treatment.

Rust Caused Palo Alto Gas Pipeline to Leak

Leaks in water systems are of often caused by corrosion or rust formation in the piping network. However, because moisture can be anywhere, even gas pipes can leak due to rusting. And that is exactly what happened in a gas transmission pipeline in Palo Alto.

The damaged pipeline is basically that of the Pacific Gas and Electric Co. It is the same one that exploded in San Bruno last year. The corrosion, though found on the outer wall, is what weakened the pipe and led to the leak.

The said leak, which was found during the pressure test last week, was just about a millimeter in size. However, it is a part of a larger, rounded corrosion pocket. And according to Kirk Johnson, vice president of gas transmission maintenance and construction for PG&E, small may the leak be, it caused some pretty serious loss of wall thickness to the pipe.

Read more about Corrosion Led to Gas Pipe Leak in Palo Alto

=============================

The Pacific Gas and Electric Co. gas pipeline that sprang a leak during a pressure test last week in Palo Alto had corrosion on its outer wall, the company said Wednesday.

The transmission pipeline, the same one that exploded last year in San Bruno, was found to have a corrosion pocket 3/4 of an inch wide when the company located the leak under busy Page Mill Road, PG&E officials said.

The corrosion weakened the pipe and led to the leak, which occurred last Thursday when PG&E voided the pipeline of gas and filled it with high-pressure water to determine its strength, the company said.

That segment of the line, near Hanover Street west of El Camino Real, was last tested for external corrosion in 2009, said Kirk Johnson, vice president of gas transmission maintenance and construction for PG&E. No corrosion was found then, he said.

==============================

Read more about Gas Piping in Palo Alto Due to Corrosion at: SFGate.com

==============================

Rust weakens metal. That in turn can weaken the entire structure or item and can cause accidents. Hence, even just a small sized-corrosion, rust removal must then be implemented once it’s spotted.

There are many rust removers that are now available in the market. However, whether you are just homeowner or rust contractor, just rust removal product won’t do you good for long. It may give you good results but those aren’t for a long period as with their chemical components they can cause problems to health.

So instead of chemical-based rust removal products, go for non-toxic rust removers as Rusterizer.

Protect metal items and surfaces from rusting. Implement an effective and safe rust removal process with Rusterizer.